Preparation - Pari BOY SX Instrucciones De Uso

3.2 Preparation

Check the compressor housing, the power cord and the power
plug for damage every time before using. Make sure that the
local supply voltage complies with the voltage data marked on
the compressor identification label. Only use the compressor if
all components are intact. The compressor must not be operated
if the device or the power cord is damaged, or if damage is
suspected (e.g., after it has fallen or if there is a smell of burning
plastic).
Prepare the device for an inhalation session as follows:
• Assemble the nebuliser as described in the instructions for use
of the nebuliser.
• Insert the nebuliser in the holder on the compressor intended
for this purpose.
• Insert the connection tubing of the
PARI nebuliser with a slight twist
into the air outlet on the
compressor.
Check carefully, ...
WARNING
Check carefully whether the other end of the PARI connection
tubing connected to the compressor is connected to the
PARI nebuliser.
When several tubing systems are present, there is a possible
danger of death if different connection options are confused
with each other. This applies particularly in the case of patients
in need of constant care who must receive artificial nutrition or
other infusion treatments.
- 36 -