Mad Catz EGO Manual De Instrucciones página 6

PS4 / XB1 Instruc�ons
1. Take out the built-in USB cable from the storage space at the back
of the arcade s�ck.
2. Connect the USB head to the USB port of PS4 / XB1 Console.
3. Hold the Switch bu�on for 2 secs, the two Lock LED indicators flash
alternately change to console mode.
4. Use the USB cable (1m) connect the micro USB head to the micro
of the PS4/XB1 controller, then connect the USB head to the USB port
at the back of the arcade s�ck. The two Lock LED indicators both turn
ON for 3 seconds indicate the PS4/XB1 controller successfullyconnect
to the arcade s�ck, then back to normal to indicate theKEYLOCK status.
Please keep the USB connected to your PS4 / XB1 controller and arcade
s�ck while in playing.
5. If the PS4 / XB1 controller does not successfully connect to the arcade
s�ck, the two LOCK LED indicators both flash 3 �mes, then back to normal
to indicate the KEYLOCK status. Please remove the USB cable from
the USB port at the back of the arcade s�ck, repeat steps 2, 3 & 4.
06