Toparc 068636 Manual De Instrucciones página 4

WARNINGS - SAFETY RULES
GENERAL INSTRUCTION
These instructions must be read and understood before any operation.
Any modification or maintenance not indicated in the manual must not be undertaken.
The manufacturer shall not be held liable for any personal injury or material damage caused by use not in accordance with the instructions in this
manual. In the event of a problem or uncertainty, consult a qualified person to handle the installation correctly.
This manual describes the wiring of this product. Any user who does not strictly comply with the safety instructions described in this manual may
be exposed to electrical risks and/or a serious or even fatal accident
ELECTRIC SAFETY
During any intervention on the product, make sure to secure the area by keeping at a distance any person who has not read the instructions of safety
described in this manual. This product should preferably be installed by a professional in accordance with the installation rules in force in the country.
If not, it is recommended that you read these rules before working on it.
PRECAUTIONS AGAINST ELECTROSTATIC DAMAGE
Static electricity can damage electronic equipment. Use a grounded anti-static wrist strap, an ankle strap, or equivalent safety device
to prevent electrostatic damage (ESD) when installing this product.
INSTALLATION
The installation of the kit must be done with a case disconnected from the generator.
1
3
Remove the plastic cap* next to the wire feeder
4
FOR OPEN ARC TORCH
Open the case
ADAPTER KIT
2
Remove the light grey cover by unscrewing the 6 Torx
4
Pass the wiring harness through the hole and lock the cable gland
by means of its nut.
EN
screws.
®