Assembly - HOMEDEPOT EF200S-52 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
2
Hanging the fan
WARNING: The hook (XX) is only to balance the fan while
making the electrical connections. Failure to hang as shown
may result in the hook (XX) breaking, causing the fan to fall.
The hook must pass from the inside to the outside of the
canopy.
WARNING: When hanging the fan on the hook (XX) it is
critical that you use one of the non-slotted (round) holes in
the canopy (C).
□
Carefully lift the fan-motor assembly (E) up to the slide-on
mounting bracket (A).
□
Insert the ball portion of the ball/downrod assembly into
the socket of the slide-on mounting bracket.
□
Turn the ball/downrod assembly clockwise until it is seated
with the tab of the slide-on mounting bracket aligned with
the slot in the ball.
□
If using close-to-ceiling mounting, hang the fan on the
hook provided by utilizing one of the holes at the outer rim
of the ceiling canopy (C).
XX
9
Please contact 1-877-527-0313 for further assistance.
Standard mount.
D
Close to ceiling mount.
C
D
E
HOMEDEPOT.COM
A
B
C
E
A