ONE 360 Manual Del Usuario página 26

EN
Group 2 / 3
(For children from 15-36 kg)
•
Loosen the belt, thread the belt system and
1
the padding out of their metal brackets on
the back of the child car seat and guide
them through the child car seat to the front.
•
Remove the shoulder pads and belt buckles
from the belt.
•
Fold the belt together so that it can be stored
behind the cover in the recess on the backrest.
•
To remove the belt buckle, thread the belt
through the H-shaped attachment point.
•
Keep all removed parts in a safe place.
•
Place the child car seat on the car seat and
2
place it in the forward facing position.
•
Press both side Isofix connector buttons to
extend the Isofix connectors in length.
•
Insert the Isofix connectors into the insertion
aids and press until they click into place.
•
The display on both sides only turns green
when the connections are made. Pull the
child car seat towards the backrest until it
stands securely.
•
Place the child in the child car seat.
3
•
Adjust the height of the headrest so that
the red seatbelt guide under the headrest
remains free.
•
Guide the car's seat belt through the red
belt guide under the headrest of the child
car seat.
•
Make sure that the lap belt runs through the
side of the child car seat.
•
Make sure that the lap belt in particular is
tight and runs as low as possible over the
child's pelvis.
•
Close the 3-point safety belt with the buckle
on the car seat. Take care that the 3-point
safety belt is not twisted.
•
Pull the vehicle's 3-point safety belt as tightly
as possible and check that the child car seat
is securely positioned.
- 26 -
CLE
This p
the tim
future
Do not
of you
hing th
30
30
MAI
Regula
use an
If you h
TeamT
Rue de
38230
France