8. Fill foam cannon. (See Figure 9)
NOTE: Do NOT use thick detergent, as it can
clog the power washer.
9. Attach foam cannon (stored in rear of pressure
washer) into end of lance by pressing cannon into
place. It will make a "click" sound when firmly in
place. (See Figure 10)
10. Attach garden hose adapter (GHA) to power washer
water inlet. (See Figure 11)
Figure 11
11. Attach GHA to end of garden hose. (See Figure 12)
PAGE 3 OF 12
ASSEMBLY CONTINUED
Figure 9
Figure 10
Figure 12
12. Install handle to power washer unit. Secure with 1½"
screws and nuts. (See Figure 13)
13. Install hose hook onto backside of handle. Secure
with three 5/8" screws. (See Figure 14)
14. Plug machine into a grounded outlet and push RESET
button. (See Figure 15)
Figure 15
Figure 13
Figure 14
0521 IH-8942