Troubleshooting - Oregon Scientific DS 9541 Guia De Inicio Rapido

All manuals and user guides at all-guides.com

Troubleshooting

Problem
Cannot turn on the Low battery power.
camera by pressing the Battery placed at
"power" button. wrong polarities.
Photos can not be saved The memory card or
when taking pictures. built-in memory
hasn't been
formatted properly.
Cannot find removable 1. Connection
disk after connecting the
camera to the computer. 2. The mode of the
Flash does not work. Battery Power is too
low.
The batteries used Use wrong type of
up very fast. battery.
The photos are over Set the flash light to
exposure
force mode
bright environment.
The photos are blurry 1. The camera is not
2. The lens of
Cause Solution
Replace or install the battery
correctly.
Format the memory in SETUP
mode of the camera. Please refer
to section 5.3.
1. Make sure all cable
failure. connections are secured and
restart the computer if
camera is not set necessary.
to removable disk 2. Set the camera to removable
properly disk mode, refer to section
6.3.1(system setting, USB
connection).
Replace with new ALKALINE
battery.
Replace with new ALKALINE
battery.
Set the Flash light to Auto
in mode .
1. Hold the camera steadily until it
held steadily beeps when taking photo.
2. Clean the lens with soft dry
camera is dirty cloth.
12