Hardware Installation - AirLive WL-1000CAM Guia De Inicio Rapido

Important Information
The default IP address is 192.168.2.3
The default login name is admin
The default password is airlive

Hardware Installation

1. Attaching the Camera Stand
The Wireless Internet Camera comes with a camera
stand, which has a swivel ball screw head that can be
attached to the camera's screw hole on the
top/bottom panel. Attach the camera stand to the
camera and station it for your application.
WL-1000CAM
System Requirements:
CPU: Intel Pentium II 266MHz or above
Memory: 32MB (64MB recommended)
VGA resolution: 800x600 or above
2. Installing the Antenna
Fasten the antenna to the connector on the rear
panel of camera. (Please refer to the user manual
for Wireless installation)
English
3