General Warnings; Particular Warnings - Sanremo SR80N Libro De Instrucciones

E N G L I S H

GENERAL WARNINGS

Read thoroughly and stick closely to the
instructions and warnings. Before use,
ensure that the mains voltage is the same as
the voltage indicated on the data plate of
the machine. Connect the appliance only to
10 Amp. sockets that are efficiently earthed.
Always remove the plug from the socket
before carrying out any maintenance or
cleaning of the appliances.
Any tempering with the machine or connec-
tions not complying with the above indica-
tions invalidate the manufacturer's guaranty.

PARTICULAR WARNINGS

Never tamper with the machines anyway.
For all interventions or tampering on the
machines, always apply only to the author-
ized centre service. Never pull the power
cable to remove the plug from the socket.
Only use the appliance for the purposes it is
meant for. Position the appliance a mini-
mum of 5 cm. from walls so as to allow
good aeration. Keep the appliance away
from sinks and jets of water. Never leave the
machine unguarded when switched on.
Keep it out of the reach of children and
incompetent people. Never switch on a
machine that seems to be faulty. Use only
original accessories and parts. To avoid the
danger of fire, never cover the appliances.
Unplug the appliance from the mains when
it is not in use. Let the appliance to cool
down before moving it. In the interest of
safety, the appliances must always be con-
sidered as live.
lf the coffee grinder is to remain inactive
for a long period, clean it carefully, dry
the top container and leave it open.
All manuals and user guides at all-guides.com
8
INSTRUCTIONS
COFFEE GRINDER-DOSER SR80N
Apliances to ground coffee beans.
ATTENTION: Moving parts.
OPERATION
Before inserting the plug in the socket or
turning on the main switch upstream from
the machine, ensure that the switch on the
machine is on position "0". Insert the shut-
ter that closes the top container and check
that it slides in its seat.
Fit the container in its seat, pressing at the
side with your fingers until it is firmly in
place. lf your coffee grinder has an automat-
ic switch, check that the lever is in the posi-
tion indicated. The coffee grinder is now
ready for work. Pour the coffee beans into
the top container. Open the shutter. Insert
the plug in the socket or turn on the main
switch upstream from the machine, then
turn the machine switch to position "1".
Check the grain size of the ground coffee;
each grinder is set for medium-fine grain. lf
you're not satisfecd with this result you
must proceed as follows:
1) Press the ring nut pawl downwards.
2) Turn the ring nut to the RIGHT for finer
grain or to the LEFT for coarser grain.
SECURITY SYSTEM TO AVOID
THE ACCESS TO THE MOVING PARTS
There are many protection systems to avoid
the access to the rotary parts as the safe
screw on the beans container and the met-
al ring, the fixed cone of protection inside of
the beans container and the protection in
metal placed in front of the milled coffee
exit. All these devices are conceived in order
to protect who use the ap-paratus. For this
reason, we underline that you don't have
absolutely remove or modify them and, for
any problem of malfunctioning, you have to