System Example; Installation And Safety Instructions - Kathrein VWS 2900 Manual Del Usuario

System example

Installation and safety instructions

• The unit described is intended solely for the installation of satellite receiver systems.
• Any other use, or failure to comply with these instructions, will result in voiding of warranty cover.
• The unit may only be installed in dry indoor areas. Do not install on or against highly combustible materials.
• The VWS 2900 should be provided with an equipotential bonding wire (Cu, at least 4 mm
• The safety regulations set out in the current EN 60728-11 and EN 60065 standards must be complied with.
• Suitable securing fastenings: Wood screws, max Ø: 4.5 mm
• Connector: RF plug 75 Ω (series F) to EN 61169-24.
Current-carrying unit
• Do not open or tamper with the unit!
• When working on the system always unplug the mains plug from the wall socket!
• Ensure adequate clearance! Clearance all round at least 5 cm!
• The unit must not be mounted on the ceiling!
• Free circulation of air must be possible to discharge the heat emitted by the unit. Risk of overheating!
Caution:
• No liquid-fi lled items may be placed on top of the power supply unit.
• The power supply unit must not be exposed to dripping or splashing water.
• The mains plug must be easily accessible and operable.
• The only reliable method of disconnecting the unit from the mains is to unplug it.
Electronic equipment is not household waste in accordance with directive 2002/96/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL dated 27
it must be disposed of properly.
At the end of its service life, take this unit for disposal at a designated public collection point.
Internet: http://www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 - 3 . P.O. Box 100 444 . 83004 Rosenheim . GERMANY . phone +49 8031 184-0 . Fax +49 8031 184-306
Symbolic representation
th January 2003 on used electrical and electronic equipment,
2
).