FUNK WS9252 Manual De Instrucciones página 14

1. LCD display

Display of the time, alarm time, outdoor & indoor temperature &
humidity and weather forecast.
2. SNOOZE / LIGHT key

Press it to turn on backlight for 5 seconds.

When the alarm is sounding, press it to stop the current alarm and
activate snooze.
3. ALARM SET key

Press it to display alarm time for 5 seconds. During alarm time
displayed, press it to turn on/ off alarm function.

Press and hold it for 3 seconds to enter alarm setting mode.

In alarm setting mode, press it to step the setting item, and press it to
save and exit the setting.
4. CH/+ key

In normal mode, Press it to select channel 1 to channel 3.

Press and hold it for 3 seconds to turn to channel auto-change mode.
Press it again to return to normal mode.

In setting mode, press it to adjust the value of the flashing digit
upwards. And press it without releasing to speed up the setting.
5. MEM/- key

In normal mode, press it to check the max./min. indoor and outdoor
temperature record for 5 seconds.

Press and hold it for 3 seconds to delete the max./min. temperature
record.

In setting mode, press it to adjust the value of the flashing digit
downwards. And press it without releasing to speed up the setting.
6. DISPLAY SET key

In normal mode, press and hold it for 3 seconds to enter time setting
mode.

In time setting mode, press it to step the setting item, and press and
hold it for 3 seconds to save and exit the setting.
7. °C/°F slide switch

Select temperature unit between °C/°F.
8. SENSOR key

Press it to start 433 MHz channel test for main unit & transmitter.

During the channel test, press and hold it for 3 seconds to manual turn
off.
9. RCC key

Press it to manual receive RC signal.
GB2