Tripp-Lite DDR1323S Manual Del Propietário página 4

1. Install the Pole and Desk Clamp Assembly
tighten
adjustable height
3mm Allen Key
loosen
collar
3mm Allen Key
3mm Allen Key
tighten
2. Desk Installation
2a. Edge Installation
Note: min. desktop thickness=10mm (.4")
max. desktop thickness=90mm (3.5")
tighten
• Determine approximate location for mount, keeping in mind display size, height adjustment and pitch/roll
requirements.
• Slip the desk mount assembly over the edge of desk so that clamp fully contacts desk edge.
• Turn the knob to adjust the clamp to edge of desk and secure it tightly.
4
13-04-174-93329B.indb 4 5/14/2013 1:30:18 PM