Installing The Batteries - Bionik VULKAN Guia Del Usuario

ENGLISH
Thank you for purchasing this bionik
goal is to deliver high-quality, innovative accessories that
amplify your gaming experience. Please review this guide and
store it for future reference. Otherwise, please recycle. User
guides can also be downloaded from our website at
www.bionikgaming.com.

INSTALLING THE BATTERIES

1.
Begin by unpacking all the contents. Check packaging closely to
ensure all accessories are removed. The inner box can be retained
to store product when not in use.
2.
Gently remove the battery cover on the back of the Vulkan™ (FIG. 1).
3.
Install 2 AA batteries (not included) correctly into the
compartment (FIG. 1).
4.
Replace the battery cover.
IMPORTANT: Use high quality alkaline batteries for longer
playing times.
BUTTONS (FIG. 2)
1.
BACK – When applicable, this button will allow you to move to the
previous screen.
2. Home ( ) button / LED – Turns the Vulkan™ on and o ; when
applicable, this button will allow you to return to the home screen;
to turn o the Vulkan™, press and hold until home LED goes o ;
home LED will flash slowly for 10 seconds when batteries are low.
3.
START – When applicable, this button will allow you to start and
pause a game.
ANDROID DEVICE CONNECTION WITH BLUETOOTH
™
1.
Move the mode selection switch to the Android
2. For initial pairing, press and hold the home button for 4 seconds
until the home LED rapidly flashes blue.
3.
Select Bluetooth
Bluetooth enabled device. Once paired, the home LED will be a
®
solid blue.
4.
After initial pairing, press the home button once and the Vulkan™
ID "Bionik Vulkan Controller" from your
®
8
gaming product. Our
™
icon (FIG. 3)
™
®