CAUSE SOLUTION
PROBLEM
◾
The motor shaft or trimmer head is bound
with grass.
◾
There is not enough line on the spool.
◾
The trimmer head is dirty.
Trimmer head will not
advance line (only
using with trimmer
◾
head).
Line is tangled on spool.
◾
The line is too short.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E
SOLUTION
◾
Stop the machine, remove the
battery and remove the grass from
the motor shaft and trimmer head.
◾
Remove the battery and replace the
cutting line, follow the section "LINE
REPLACEMENT" in this manual.
◾
Remove the battery and clean the
spool, lower cover assembly and
upper cover.
◾
Remove the battery, remove the line
from the spool and rewind, follow
the section "LINE REPLACEMENT" in
this manual.
◾
Remove the battery and pull the
lines while alternately pressing
down on and releasing the bumb
knob.
EN
17