Health O Meter BABYHR Manual De Instrucciones página 2

Wall Mount Instructions
Step Instructions
1
Position the rod along the wall,
next to a patient exam table or
bed. Mark a cross at an
appropriate height via the hole
on the rod.
2
Align the cross with one hole
then mark the position for the
second hole horizontally.
3
Using a 5.5mm drill bit, drill
through both markings to
make holes at least 30 mm
deep for the wall anchors.
4
Insert the wall anchors firmly
into the hole on the wall.
P/N UMBABYHR Rev20141016_web
Illustration
2