Pairing The Headset - GE 86711 Manual De Instrucciones

Pairing the Headset

1. Before pairing the headset, make sure the
headset is fully charged.
2. Enable the Bluetooth function on your
phone according to the phone's manufac-
turer's instructions.
3. Turn on the headset by pressing and
holding the Function Button, for approxi-
mately 10 seconds. You should see the
LED flashing blue and red. The headset is
now in the paring mode.
4. On the mobile phone being paired to
the headset, follow the manufacturer's
instructions. You will eventually be asked
to enter a pin number.
5. Enter this pin number when prompted.
(1234)
6. When the pairing is successful, your
phone should display the name of the
headset as BTH11
a. The blue LED will slowly flash on and off.
Note: You do not have to pair the headset to the phone again
once it is paired. Some phone models may require reconnecting
the phone to the headset; refer to the phone's manufacturer's
instructions. If you wish to pair the headset to another phone, turn
off the phone the headset was originally paired with and follow the
pairing instructions according to the new phone's manufacturer's
instructions. When prompted for the pin number, use the same
number (1234) as in step 5.