Asus Xonar Xense Manual De Instrucciones página 3

Hardware introduction
Audio card layout
1
2
3
4
Microphone In port
1
Connect your headset's microphone cable to this port for voice input. It has a built-
in high-quality Microphone pre-amplifier.
Line In port
Through an Ultra-high fidelity 118dB SNR A-D converter, connect analog devices
like MP3 players, CD players, music synthesizers, and other line-level sound
sources to this 6.3mm port for audio recording or processing.
Headphone Out port
2
Connect your headset's out cable to this port.
• DO NOT connect your speakers to the headphone out port. The possible
high driving power may cause damage to your speakers.
• Before connecting your headphone, adjust the headphone impedance
settings in the Xonar Xense Audio Center to match your headphone
impedance. This is to prevent damage to your headphone.
7.1 ch Speaker Output
3
Connects to your speakers via 7.1 channel audio splitter cable.
S/PDIF Out port
4
Coaxial and optical TOSLINK combo digital output port. Connect to external digital
decoder or digital speaker systems, Home Theater systems, AV receivers for
outputting digital audio including PCM, Dolby Digital, DTS, and WMA-Pro.
9
ASUS Xonar Xense Quick Start Guide
6 7
5
8
3