Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Chrysler Data Interface with SWC 2004-2019
INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides wires for multimedia radios
(parking brake, reverse, speed sense)
Non-amplified models only
From the WM-CH13-SWC harness to the aftermarket radio, connect the:
• Black wire to the ground wire.
• Yellow wire to the battery wire.
• Red wire to the accessory wire.
• Blue wire to the power antenna wire.
• Blue/White wire to the amp turn-on wire.
• Orange wire to the illumination wire (if applicable).
• Gray wire to the front right positive speaker output.
• Gray/Black wire to the front right negative speaker output.
• White wire to the front left positive speaker output.
• White/Black wire to the front left negative speaker output.
MetraFits.com
• Retains audio controls on the steering wheel
• Retains balance and fade
• Micro-B USB updatable
CONNECTIONS
• Purple wire to the rear right positive speaker output.
• Purple/Black wire to the rear right negative speaker output.
• Green wire to the rear left positive speaker output.
• Green/Black wire to the rear left negative speaker output.
• Blue/Pink wire to the VSS/speed sense wire.
• Green/Purple wire to the reverse wire.
• Light Green wire to the parking brake wire.
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Continued on the next page
WM-CH13-SWC
I N S T A L L A T I O N I N S T R U C T I O N S
APPLICATIONS
Chrysler
Jeep
200
2011-2014
Commander
300
2005-2010
Compass
Aspen
2007-2009
Grand Cherokee 2005-2013
PT Cruiser
2006-2010
Liberty
Sebring
2007-2010
Patriot
Town & Country 2008-2017
Wrangler (JK body type)
Dodge
Avenger
2008-2014
Mitsubishi
Caliber
2007-2012
Raider
Caravan
2008-2019
Ram
Challenger
2008-2014
1500,2500, 3500,
Charger
2006-2010
4500, 5500
Dakota
2005-2011
C/V Tradesman 2012-2015
Durango
2004-2013
Volkswagen
Journey
2009-2010
Routan
Magnum
2005-2009
Nitro
2007-2011
Ram 1500,2500, 3500
2006-2011
For Additional
Product Info
REV. 3/25/20 INST-WM-CH13-SWC
2006-2010
2007-2017.5
2008-2012
2007-2017
2007-2018
2006-2009
2012
2009-2013

Publicidad

loading

Resumen de contenidos para Metra WM-CH13-SWC

  • Página 1 • Gray/Black wire to the front right negative speaker output. Continued on the next page • White wire to the front left positive speaker output. • White/Black wire to the front left negative speaker output. MetraFits.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 3/25/20 INST-WM-CH13-SWC...
  • Página 2 1. Open the driver’s door, and keep open during the programming process. Cycle the ignition on. Or via email at: 2. Connect the WM-CH13-SWC harness to the WM-CH13-SWC interface, and then to the wiring harness in the vehicle. techsupport@metra-autosound.com Note: Use only the vehicle harness that fits and disregard the other.
  • Página 3 • Cable gris/negro con la salida negativa de la bocina derecha delantera. Continua en la siguiente pagina • Cable blanco con la salida positiva de la bocina izquierda delantera. • Cable blanco/negro con la salida negativa de la bocina izquierda delantera . MetraFits.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 3/25/20 INST-WM-CH13-SWC...
  • Página 4 386-257-1187 1. Abra la puerta del conductor y manténgala abierta durante el proceso de programación. Encienda el encendido. 2. Conecte el arnés WM-CH13-SWC a la interfaz WM-CH13-SWC y luego al arnés de cableado del vehículo. O por correo electrónico a: techsupport@metra-autosound.com Nota: Use solo el arnés del vehículo que se ajuste y no tenga en cuenta el otro.