LECTRO VL-VRN8 Manual Del Propietário página 68

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
1. Recording Library: Enter the Library to select a recorded file to play, and if you
have not recorded a voice file, prompt "No voice recording found."
2. Recording settings: Select "Recording bit rate, recording format, recording
sensitivity, recording monitoring, segmented recording, timed recording, voice control
mode" after selection.
Recording bit rate: WAV Format:512kbps/768kbps/1024kbps/1536kbps,
MP3 Format: 32kbps/64kbps/128kbps/192kbps;
Recording format: Optional MP3 format, WAV format (default WAV format);
Recording sensitivity: level 0-7 a total of 8 adjustable levels, the higher the sensitivity
of the recording of the sound, the louder the noise;
Recording listening: listen (off), listen (on). Plug in the headset when listening (on) to
hear the recording in real time;
Segmented recording: off,30 minutes, 60 minutes, 90 minutes,120 minutes. Each
file is automatically saved when the time is set, and then a new file is automatically
generated to continue recording.
Timed recording: Select a timed recording to display "Recording (on/off), timed
recording cycle, start time, end time".
① Before enabling timed recording, please go inside the settings to adjust the machine
time date accurately. The setup method is referred to the Settings section that follows.
② When timing recording is enabled, make sure that the machine power switch does
not turn off, otherwise the recording will not be turned on automatically.

Publicidad

Tabla de contenido
loading

Tabla de contenido