Tripp-Lite U444-06N-V-C El Manual Del Propietario página 4

Installation
Note: When the unit is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no connection
is made, you can manually establish one by going to your
computer's network settings page. For example, on a Mac
you would navigate to the Network section found in System
Preferences, click the 'Assist Me' button to get to the Network
Setup Assistant, then follow the prompts to establish a
connection.
1. Connect the adapter's USB Type-C connector to
2. Connect the adapter's VGA port to the monitor's
3. Charge your device by connecting its USB-C charger
4. Connect a USB device to the adapter's USB-A hub
5. Connect the adapter's RJ45 port to a network using
*USB-C port for U444-06N-VU-C and U444-06N-VUB-C
models support both data transfer and charging.
**See the USB Type-C Features chart for the features your
product supports.
17-12-057-9336FA.indb 4
the USB-C port on your laptop, tablet or other
compatible device.
VGA port using a VGA cable (such as Tripp Lite's
P502-Series VGA cables).
to the adapter's USB-C port.*
port.*
a UTP cable (such as Tripp Lite's N201-Series Cat6
cables).**
4
12/12/2017 12:49:40 PM