Cleaning The Housing; Cleaning The Accessories; Storage; Troubleshooting - Parkside KM 600 A1 Instrucciones De Uso

NOTE
► We recommend cleaning the appliance
directly after use . This makes food residues
easier to remove .

Cleaning the housing

■ Wipe the housing with a damp cloth . For stub-
born soiling use a mild detergent on the cloth .
Wipe off any detergent residue using a cloth
moistened with clean water . Then dry the
appliance carefully .

Cleaning the accessories

■ Clean the mixing bowl 6, the lid 9, the filling
accessory 8 and the kneading hook 0, the
whisk q and the beater w in warm water with
a little washing-up liquid . Any residues can be
removed with a washing-up brush . Rinse all
parts with warm clean water and make sure that
all parts are dry before re-using them .
NOTE
► The mixing bowl 6 is also suitable for cleaning
in a dishwasher .
■ 18
│ GB│IE

Storage

■ Wind the power cable 4 around the cable
retainer on the underside of the appliance .
■ Store the cleaned appliance in a clean, dust-free
and dry location .

Troubleshooting

If the appliance suddenly stops working:
■ The appliance has overheated and triggered the
automatic safety cut-out .
–
Turn the rotary switch 3 to "OFF" .
–
Remove the plug from the wall socket .
–
Allow the appliance to cool for 15 minutes .
–
If the appliance has not yet cooled off com-
pletely after 15 minutes, it will not start .
–
Wait a further 15 minutes and try switching
on again .
If the appliance cannot be switched on.
–
Check that the plug is correctly connected to
a wall socket .
–
Check whether the swivel arm 1 is in the
correct position .
KM 600 A1