DAY 73363 Manual De Instrucciones página 24

Press SET to con� rm your setting. The 12/24
hour mode display starts to � ash. Now
use the UP and DOWN buttons to set the
correct 12/24 hour mode.
Press SET to con� rm your setting. The Hour
display starts to � ash. Now use the UP and
DOWN buttons to set the correct hour.
Press SET to con� rm your setting. The
Minute display starts to � ash. Now use the
UP and DOWN buttons to set the correct
minute.
Press SET to con� rm your setting and to end
the setting procedures. The clock mode will
be displayed.
Note
After 7 seconds without pressing any
button, the clock switches automatically
from Set Mode to Normal Time Mode.
There are 7 languages for Weekday: English,
German, Italian, French, Spanish, Dutch and
Danish
Setting the daily alarms
In clock mode, press the ALARM button
once. The LCD display will display the alarm
icon (12).
Press and hold the ALARM button for 2
seconds until the Alarm Time � ashing icon
is displayed. Now use the UP and DOWN
buttons to select the alarm time you require
and brie� y press the ALARM button to set
this Alarm time.
The Hour display of the Alarm time starts to
� ash. Use the UP and DOWN buttons to set
the required hour. Press the ALARM button
to con� rm your setting.
24
The Minute display of the Alarm time starts
to � ash. Use the UP and DOWN buttons to
set the required minute. Press the ALARM
button to con� rm your setting and to end
the setting procedure.
To activate or deactivate the daily alarms,
brie� y press the ALARM button once.
Note
After 7 seconds without pressing any
button the clock switches automatically
from Set Mode to Normal Clock Mode.
The alarm will sound for 1 minute if you do
not deactivate it by pressing any button.
The alarm will then repeat automatically
after 24 hours.
Rising alarm sound (crescendo, duration: 1
minute). The volume changes 4 times whilst
the alarm signal is heard.
Automatic snooze function
To activate the automatic snooze function:
While the alarm is sounding, press the
SNOOZE/LIGHT button to activate the
snooze function. When the snooze function
is activated, the snooze icon (9) appears in
the display.
This operation moves the alarm back by 5
minutes. The alarm will restart at this time.
°C/°F temperature display
The temperature is displayed in either °C
or °F. Brie� y pressing the DOWN button
allows you to switch between the individual
modes.