Collection System
All Brand Models – Choose the "Universal
Fit" adapter (5) and place it onto the Vacuum
Outlet. Please refer to step B1-B5
1. Place the fabric side of the Universal
Adapter over the Vacuum Outlet and slide it on
as far as possible (B1)
2. Pull to tighten the strap and snap the latch
down (B2)
3. Test that the Universal Adapter will not slide
off of the blower/vac outlet
4. If further tightening is needed, then unlatch
the latch button and tighten the strap to further
lock the Universal Adapter. Press the latch
down again and recheck if it will slide off of
the blower/vac outlet (B3). Realign and repeat
these steps if needed.
5. Slide the Collection System adapter over
the aligned Locking Pegs and turn clockwise
to lock, ensure they are fully secured (Please
refer to B5).
Please note: The Universal Adapter may
have space between the Vacuum Outlet and
Adapter Outlet after installation.
To remove the adapter, simply unlatch and
loosen the strap to remove it from the Vacuum
Outlet (Reverse B4).
6
SECTION 5
Assembly: Container Installation -
LEAF PRO™ Universal Collection
(See Fig. C, D, E)
SECTION 6
Assembly: Troubleshooting
NOTE: If you are having a hard time keeping
the cover on the trash can, please try the
following: Cut a notch between the handle and
trash can rim to create a grove for the
cover to rest in.
LEAF PRO™
EN