System Configuration - Alcad DKE-140 Manual De Instrucciones

3. DKE-140 DEMOKIT INITIALITATION
To start using the demo, you need to turn on the server. Connect the power supply to the mini PC and the cnetwork
cable; cable that would be connected to the switch.
Moreover a PC would need to be connected to the switch; the PC could be a laptop or desktop. Once the PC is
powered on, you can access to the portal trough the following URL: http://172.23.202.1/alcadiptv/portal/ .
To achieve that you would need to have the PC configured in DHCP mode to take IP automatically from the server.
The default user and password would be:
- User: admin
- Password: admin
Last the STB-051 would have to be powered connected to the switch with a network cable, and connected to
the TV by a HDMI cable.

4. SYSTEM CONFIGURATION

The system has a single room configured (101), and a single guest with the same name as the room number.
The demo will also have the funtionalities: room service, information, films and music. On the other hand, the sys-
tem has a couple of already recorded channels, but in case of having a streamer, it could be used for showing a
list of real channels instead of preloaded ones.
4 - DKE-140-MAN