Introduction; Proper Use; Description Of Parts; Technical Data - Miomare HG07028B Guía Rápida

Bath & Shower Mixer Tap

Introduction

This quick reference guide is a
fixed part of the operating in-
structions. Keep both this and
the operating instructions in a safe place.
When passing this product on to third
parties, please be sure to include all doc-
umentation. Read the operating instruc-
tions before use, and pay particular
attention to the safety instructions in-
cluded in the operating instructions.

Proper use

This product is suitable for all pressure-tight hot water
systems such as central heating boilers, instantaneous
water heaters, pressurised boilers and the like. It is
not suitable for low-pressure water heaters such as
wood or coal burning bath geysers, oil or gas bath
geysers, open electrically heated water tanks. If in
doubt please seek the advice of a plumber or heating
engineer. Any use other than that described here or
modification to the product is not permitted and may
lead to damage to persons or property. There is
also the risk of injury and loss of life. The product is
intended for personal use only and not for medical or
commercial use. The manufacturer accepts no liability
for loss or damage arising from improper use.

Description of parts

2 S-connectors
1
2 Rosettes
2
2 Sealing rings
3
1 Tap body
4
1 Changeover button
4a
1 Threaded connector (for the shower hose)
4b
1 Mixer nozzle
4c
2 Nuts (for S-connectors)
5
1 Control lever
6
1 Locking screw
7
12 GB/IE
1 Plastic cover
8
1 Cartridge end ring
9
1 Cartridge locking ring
10
1 Cartridge
11
1 Setting ring
12
1 Hexagon key
13
1 Key for aerator
14

Technical data

Connection spacing:
Connections (Shower hose): G½
Water connection nut:

Safety advice

OF LIFE OR ACCIDENT TO IN-
FANTS AND CHILDREN! Never
leave children unsupervised with the packaging
materials. Danger of suffocation. Keep the product
away from children. The product is not a toy.
CAUTION - RISK OF ELECTRIC
SHOCK! Leaks or the escape of
water can lead to danger to life from
electric shock. Check all connections for leaks
carefully. In addition, ensure that all cables from
electrical devices are correctly and safely installed.
CAUTION! RISK OF INJURY! Please ensure
that no parts are damaged and that all parts are
correctly assembled. Incorrect assembly could
lead to injury. Please note that seals are wear
parts and therefore will require to be replaced
from time to time. Damaged parts could adversely
affect safety and proper function.
CAUTION! RISK OF DAMAGE TO
PROPERTY! Have the installation done by
experienced persons only. Leaks or escape of
water can lead to serious damage to buildings
or household fittings and furniture. Check all
connections for leaks carefully.
Ensure that all seals are correctly seated to
prevent leakage of water.
136–164 mm
(approx. 21 mm)
approx. 28.5 mm
RISK OF LOSS