Troubleshooting; Warranty - Air innovations CLEAN MIST MH-901DA Manual De Instrucciones E Información Sobre La Garantia

Troubleshooting

PROBLEM: Power Light is OFF
POSSIBLE CAUSES
a. Unit is not plugged in
b. No power at outlet
POSSIBLE SOLUTIONS
a. Plug in power cable
b. Check circuits, fuses, or try a different outlet
c. Press the POWER button to turn
the power on
PROBLEM: Weak or No mist output
POSSIBLE CAUSES
a. No water in tank
b. Unit is not level
c. White Dust on Ultrasonic Nebulizer
and/or Water Sensor
d. Blower not operating
e. Water temperature is too low
f. Ultrasonic Nebulizer is not operating
POSSIBLE SOLUTIONS
a. Fill tank with water and wait 10 – 15 minutes
b. Place unit on level surface
c. Clean humidifier per instructions
d. Ensure there is enough water in Base
to activate Water Sensor
e. Set output to High and wait for
10 – 15 minutes
f. See Warranty
g. Air holes are blocked
PROBLEM: Peculiar Odor
POSSIBLE CAUSES
a. Unit is new.
b. Dirty Water Tank or old water in tank
c. Minerals in well water or hard water
POSSIBLE SOLUTIONS
a. Gently wipe the Base with a soft damp cloth
b. Empty old water and clean Water Tank per
instructions
c. Visit our website (www.Air-innovations.com) to
purchase Humidifier Demineralization Filters or use
filtered or distilled water.
PROBLEM: White Dust on unit or nearby furniture
POSSIBLE CAUSE
a. Hard water used
POSSIBLE SOLUTION
a. Visit our website (www.Air-innovations.com) to
purchase Humidifier Demineralization Filters or use
filtered or distilled water.
PROBLEM: Condensation forms
around humidifier or windows
POSSIBLE CAUSES
a. Mist output is set too high for the room size
b. Direction of Rotating Mist Nozzle
POSSIBLE SOLUTIONS
a. Decrease the mist output
b. Change direction of the Rotating Mist Nozzle
PROBLEM: Water is leaking
POSSIBLE CAUSES
a. Water Tank is not properly seated
b. Unit is not on level surface
POSSIBLE SOLUTIONS
a. Follow #1 on page 4 "Filling the Water Tank"
b. Place on level surface
7