SAFETY INFORMATION
• Read these instructions carefully before assembly.
• It takes two people to assemble this product.
• Paint on this furniture might peel if it is not handled properly. Handle with care.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 20 minutes
Tools Required for Assembly: Hex Wrench (provided)
ASSEMBLY INSTRUCTIONS
1. Put the table top (B) upside down on a
soft surface such as carpet. Attach table leg
(C) to table top (B) using short bolt (AA) and
washer (CC). Don't tighten the bolts. Repeat
the above step for the remaining legs.
Hardware Used
Short Bolt (1/4 in. - 20
AA
x 0.787 in. L)
Washer
CC
2. Assemble center brace (D) to table legs (C)
by inserting long bolt (BB) and washer (CC).
Again, don't tighten the bolts completely.
Check alignment of all hardware and make
corrections if necessary. Fasten all bolts tightly
with hex wrench (EE).
Cover all bolts with bolt cover (DD).
Hardware Used
Long Bolt (1/4 in. - 20
BB
x 0.984 in. L)
Washer
CC
Bolt Cover
DD
Hex Wrench
EE
1
x 4
x 4
2
x 8
x 8
x 12
x 1
3
BB
DD
Lowes.com/gardentreasures
AA
CC
D
B
D
A
D B
C
CC