Before First Use; Filling The Water Tank - nedis KAWD100FBK Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Unplug the product from the power source before service and when
replacing parts.
Children of less than 8 years should be kept away unless continuously
supervised.
Usage by children should be supervised at all times.
This product is not a toy. Never allow children or pets to play with this
product.
Do not move the product during operation.
The temperature of accessible surfaces may be high when the product is
operating.
Do not touch the hot parts of the product directly.
Do not fill the water tank below the "min" indicator.
Do not fill the water tank above the "max" indicator.

Before first use

1. Clean the product with a damp cloth.
2. Place the product on a stable and flat surface.
3. Connect the power cable A
When you first use this product, perform two full cycles to clean the inside
-
of the product.

Filling the water tank

1. Remove the top lid A
9
2. Fill A
to the "max" on the water level indicator A
Do not fill the water tank above the "max" on A
-
Do not fill the water tank below the "min" on A
-
Do not spill any water on the product.
-
8
3. Place A
back on A
Tapping hot water
Do not remove A
-
The status indicator LED A
-
water level has reached below the "min".
1. Place a glass under the spout A
2. Choose between:
A. Tap the on / off button A
2
A
lights up blue.
w
to a power outlet.
8
from the water tank A
9
.
8
while hot water is dispensed.
2
blinks blue and green to indicate that the
3
1
once for 200 ml hot water.
9
.
q
q
.
q
.
.
6
.

Publicidad

Tabla de contenido
loading

Tabla de contenido