Publicidad
Idiomas disponibles
Idiomas disponibles
Caring for your Viper
1.
After you have used the scooter for a week or two, the wheels will need to be checked
to ensure they are still in perfect working order. To do so rotate the bearings and wheels
and check if any lubrication or adjustments are needed.
2.
DO NOT use a wet cloth, alcohol, industrial cleaners
or solvents to clean the scooter as this may result in loss of gloss, the removal of decals
or dissolve the materials in the scooter. If the scooter loses its gloss a small bit of car wax can be used to
polish the scooter.
3.
In normal circumstances it is recommended that you disassemble, clean and lubricate
the scooter every 6 months.
Please take extreme care to ensure the scooter is reassembled correctly.
4.
If the front fork, wheels and/or rear support frame are not correctly tightened you can use a wrench to
tighten the bolts correctly. Please ensure to not over or under tighten the bolts.
5.
Due to normal wear and tear the wheels and bearings may need to be replaced after some time. Please
contact Yvolution (www.yvolution.com) for new wheels. DO NOT use parts designed for other scooters,
the use of anything other than Viper parts may affect your safety.
6.
If the brake cable becomes loose, please screw out the bolt and nut on the brake gear and pull the
brake cable out with a clamp. Reposition the brake cable so that it is tense and screw the bolt and nut
onto the brake gear all the while keeping the cable tight.
7.
Over time the nuts and bolts may become loose, please check that all nuts and bolts
are sufficiently tightened before each use of your scooter.
8.
Check that the steering mechanism is correctly adjusted and that the connective components are firmly
secured and not broken.
9.
Check an secure all fasteners before every ride.
10.
Ensure all locking devices are enagged.
11.
The self-locking nuts and other self-locking elements can lose their effectiveness if released.
12.
Do not mix old and new batteries.
13.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
14.
Requires 2 x 1.5V AA alkaline batteries.
The manufacturer warranties this product to be free of manufacturing defects for a period of 1 year from date of purchase.
This warranty does not cover normal wear and tear, or any damage, failure or loss caused by improper assembly,
maintenance, or storage. There are no other expressed or implied warranties. This warranty will be void if the product is
ever:
• Used in a manner other than for recreation
• Modified in any way
• Rented or commercial uses
• Consumer abuse or neglect
• Used by riders weighing over the maximum weight listed on the product.
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this
product. Yvolution reserves the right to repair, supply replacement parts, or replace a defective product at our discretion.
For your records, save your original sales receipt.
To register online go to:
To contact customer service call:
EU
IE
US
EN
http://www.yvolution.com/warranty
+44 800 802 1197
support@yvolution.com
+353 1 5242721
support@yvolution.com
+1 855 981 7177
support@yvolution.com
Publicidad
