Publicidad
Idiomas disponibles
Idiomas disponibles
1-800-645-2986
3.
Use appropriate screws for framework
and wall conditions.
To mount louver assembly, use the
eight pre-punched 1/4" x 1/2" slotted
mounting holes of the louver assembly
to attach the unit to the framework.
4.
Seal the joint between the wall and the
louver with silicon or any other sealer.
5.
Insert the square plastic plugs into
the square holes on corner gussets
located on the back side of the shutter.
6.
Remove screws, washers and nuts
from the protective screen of the fan.
Single Speed Exhaust Fan_03-26-15.indd 3
Single Speed Exhaust Fan
3
Assembly Instructions
3/30/2015 3:08:21 PM
Publicidad
