Global 653561 Instrucciones De Ensamblaje página 6

3
3
3
10
9
8
9
Use 50 x 10 rubber pad (13),
10mm ID washer (12) and konb
Use 50 x 10 rubber pad (16), 10mm ID
(11) to attach heater to foot
washer (15) and knob (14) to attach
stand. Tighten knobs.
heater to foot stand. Tighten knobs.
Insert M6 x 55 screw (11), 6mm ID washer (12) and M6 x 20
nut (13) to footstand.
Connect the electrical power supply cable to the wiring
compartment. (See wiring instructions).
Attach connectors to the appropriate conductor and ground
wiring. After completing the connections, arrange pigtail unit
leads and power supply wires in wiring compartment.
Electric Blower Heater
Use M8 x 80 screw (10), 8mm ID
10 washer (9), and M8 nut (8) to attach
handle to foot stand. Tighten.
9
9
8
Use M8 x 80 screw (10), 8mm ID
washer (9), and M8 nut (8) to attach
handle to foot stand. Tighten.
5
6
User's Manual
4
4