INFORMATION
EN
This guide is intended for family caregivers or professional
caregivers using the TENA SmartCare Change Indicator
in a home environment or a care home. The Change Indicator
system tracks and displays urine saturation levels in TENA
incontinence products.
TENA SmartCare Change Indicator is a system consisting of:
• an app installed on one or more smartphones/handheld
devices,
• a reusable Change Indicator made up of two parts:
a sensor strip and a transmitter,
• a gateway that relays data.
Read the full TENA SmartCare Change Indicator
instructions for use before using the system.
Symbols used in this guide:
WARNING
Care shall be taken to ensure safety and efficiency.
Failure to do so could cause damage to equipment
or lead to the receipt of incorrect data.
NOTE
Important information or advice/tip.
Parts you need to set up the gateway:
LED light
Button
2
GATEWAY
MOUNTING
BRACKET
POWER
ADAPTER
TM/MC