Frequently Used Functions - Cleyver Xflex Guia Del Usuario

when battery indicator shows full. Please do not leave the phone on
charge when full as this may damage the battery and affect perfor-
mance.
2. Disconnect the charger from mains power supply when not in use.
3. In the event of a fully discharged battery, please charge the phone
for at least 15 minutes before powering it on.
4. The optimum working temperature for the Xflex is from 0°C -40°C.
Charging the phone outside this temperature range will damage the
battery and shorten battery life.
5. Please use the original charger and cable to ensure maximum
performance and safety.
6. Please note that the battery will still lose power even when the
phone is not in use and switched off. If you plan to not use the unit for
an extended period, you should still charge it a least every two months
to prevent complete power loss and to protect your data.

FREQUENTLY USED FUNCTIONS

Lock/Unlock the screen :
Press the POWER key.
The phone screen will be locked when the phone is not in use.
Unlocking the phone :
Press the POWER key to unlock the screen and slide the screen up to
unlock the phone.
Taking a Screenshot :
Press the POWER key and VOLUME DOWN key at the same time.
Making a Call :
1. Touch the phone icon on home screen.
2. Open dial pad and input phone number.
3. Touch the call record icon to check call records.
4. Touch contact icon to check contact menu.
Sending an SMS/MMS :
1. Touch the Messages icon on home screen.
2. Touch « Start chat » icon to create a new message.
3. At the top of the screen, enter a phone number or select a contact.
Type your message and then send.
4. In order to send MMS, mobile data must be enabled
Send an Email :
1. Touch the Email icon on the Home or All Apps screen.
2. If you have already signed into an Email account during setup,
your email will be synchronized to your device. Otherwise, add an
email address now.
WIFI Connection :
1. Touch the Settings icon to enter Settings menu.
2. Choose « Network & internet »
3. Push the Wi-Fi switch to enable or disable WIFI.
Enabling Mobile Data :
1. Touch the Settings icon to enter the Settings menu.
2. Choose « Network & internet » then « Mobile network ».
3. Push the « Mobile Data » enable switch to enable data connection.
4. Disable data connection when not use.
Location Services :
1. Touch Settings icon to enter Settings menu.
2. Choose « Security & location » then « Location » to turn on/off
location services.
3. Press « Google Localisation Accuracy » then check « Improve Lo-
18