Supported Software - DFI PE11-TC Manual Del Usuario

All manuals and user guides at all-guides.com
2
English

2.3 Supported Software

2.3.1 VIA Service Pack
®
The VIA Service Pack contains the following drivers.
• VIA ATAPI Vendor Support Driver
• AGP VxD Driver
• IRQ Routing Miniport Driver
• VIA INF Driver
To install VIA Service Pack, please follow the steps below.
1. On the left side of the autorun screen, click the "CHIPSET" icon.
2. Click "VIA Service Pack" on the main screen.
3. Click "Next". Please read the "VIA Service Pack Readme"
carefully before proceeding to step 4.
4. Follow the prompts on the screen to complete the installation.
5. Reboot the system for the drivers to take effect.
VIA Service Pack Installation Notes
The "AGP VxD Driver" and "VIA INF Driver" drivers in the "VIA
Service Pack" are supported in Windows
Windows ® ME and Windows
You must first install the VIA Service Pack prior to installing any
other drivers. However, this may not be the case for some AGP
cards. Please read carefully the following information.
Important:
The VGA driver that came with some AGP cards is already
bundled with the AGP VxD driver. Since the version of the
bundled VxD driver may be older than the one provided in the
CD, installing the bundled VxD driver may cause problems. If
you are using this type of card, we recommend that you install
first the AGP card's VGA driver before installing the VIA Service
Pack.
32
66500237 2.pmd
®
® 2000.
32
®
98, Windows 98 SE,
9/27/02, 4:16 PM