OK. OTG 100 Manual Del Usuario página 20

Size - A5
OPERATION
1
Place the base on a heat
resistance surface and
insert the reflector water
tray into the base.
NOTE
Always grill food when the reflector water tray is filled with water. Should the water
dry up after continuous use, unplug the power plug from the power outlet and pour
water up to the MAX mark is reached. Do not pour any cold water over the hot heating
element to avoid damage.
4
Place the grill rack on the
product. You can choose
between 2 height levels.
NOTE
Please make sure that frozen food is fully defrosted before grilling.
OTG100_A5_131108.indb 20
All manuals and user guides at all-guides.com
20
2
Fit the temperature control
box to the grill plate. Make
sure they are correctly
aligned with safety
interlock actuated.
5
Connect the power plug
to a suitable power
outlet and turn on the
thermostat. Turn the
temperature control to the
desired position.
3
Pour water into the
reflector water tray up to
the MAX mark.
5 min.
6
The heating-up light goes
on. Let the product preheat
for approx. 5 minutes.
8/11/13 10:10 AM