Getting Started
Fully charge your SPzero before initial use. Use the included Micro-USB
cable to connect your SPzero to a USB slot of any PC or USB Wall Charger
to charge. The RED LED will turn on while charging and will turn off
automatically when fully charged.
Pairing Mode
Push and hold the center button for 5-8 seconds until the LED constantly
flashes in White and you will hear a voice prompt. You are now in Pairing
Mode. See your phone/music device manual for pairing instructions. You
will hear a voice prompt when the device is paired.
Volume + / -
LED Indicator
EN
Mic
Function
Micro USB
Charging Port
AUX Output
AUX Input
LED Indicator
LED Color
White flashing in every 1 sec.
Red flashing in every 1 sec.
White flashing in every 1 sec.
White flashing in every 0.1 sec.
White flashing in every 5 sec.
White flashing in every 1 sec.
Red flashing in every 0.1 sec.
Red light on
Function button indicator
Behavior
Press and hold in 5 sec.
Press and hold in 8 sec.
Press MFB 1x
Press and Hold in 3 sec.
Press MFB 2x
Press MFB 1x
Left & Right button indicator
Behavior
- increase;
- decrease
+
-
Description
Power ON
Power OFF
Standby
Pairing
Connected
Disconnect
Low Power (standby)
Charging
Description
Power turn on/off
Pairing
Answer/End call
Reject call
(Siri—iPhone only)
Play/Pause music
Description
Adjust Volume
EN