How To Adjust Tilt; Speed Control - Orient HV-20D Guia De Inicio Rapido

HOW TO ADJUST TILT

1. Loose knob by turning counter-clockwise.
2. Adjust fan head to tile you want.
Tightened the knob by turning clockwise.
3.

SPEED CONTROL

Rotate SWITCH to LOW (1), MEDIUM (2) AND HIGH (3) speeds for respective air velocity.
It is normal for the motor to feel warm to touch after continuous operation. This fan features a thermal cutoff that will
automatically shut off should it overheat for any reason. If this happens, immediately unplug the fan from the outlet.
CLEANING
WARNING:
Unplug from electrical supply source before cleaning.
After servicing, any safety device (including grilles and blades) must be reinstalled or remounted as previously installed:

Use soft damp cloth to clean. Then wipe with dry cloth.

Do not use a cleaning solution that s harmful to paints or plastics.

Do not bend the blades.

The motor bearings are permanently sealed and do not require additional lubrication.
WARNING:
This product is not intended for use by persons (including children0 with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
If you should have any problem, operation questions or comments about this product,
contact us toll-free at 1-888-372-8518 from 8:00 a.m. to 4:00 p.m. PST, Monday to Friday
or email us at customerservice@orientfanco.com
3
Knob