Appearance & Buttons Description; Battery Management And Chargin - Multilaser diamond Manual Del Usuario

Appearance & Buttons Description
• Touch Screen: 7inch capacitive touch screen, click, drag or other operation in the touch area
• Power
- Turn On: Long press button "power" to enter menu.
- Power off: Turn to home page and drag the screen, there will be "power off" selection.
[NOTE] When battery is low, the system will auto shut down.
For improper shutdown, device will scan and repair the disk first, interface may stay in the process
bar screen for some time.
• Back: press ESC shortly to return, and press it longer to home page.
• Menu: in standby mode or software running mode, press button "M" to pop up corresponding
menu.
• Vol + & Vol-: press vol+ or vol- for volume adjustment.
• Headphone Interface 3.5 mm standard slot.
• Video Output Interface: HDMI Output Interface
18
• T-Card: TF card slot: external T-FLASH memory card
• Mini USB interface: PC connection on data transfer, charging or external USB flash drive.
• Reset: in In the case of software crashes, press "Reset" with small objects, like staples, the device
will be forced to shut down.
[NOTE] This function is suggested only in system halted. Otherwise it's not recommended, or it will
easily damage the system.

Battery Management and Chargin

• Please make sure that the device battery is fully charged one first usage.
• Just plug the charger into USB interface for charging.
• Keep the first two charging about six 6 hours. And around 4 hours next time.
[NOTE] This item was featured with built-in polymer battery, the charger should be comply with
the specification of AC110-240V 50/60Hz Max: 180MA. Output: DC5.0-5.5V/1.5A. This item doesn't
provide DC charging. USB interface can be used for charging. Choose the charger with USB interface.
• The battery icon will scroll during charging.
• Screen battery icon will turn green and stop scrolling when charging completed.
• To extend the battery life, suggest run out of the power in the first two times.
[NOTE] If the device is no used for a long time, make sure the machine will be charged one time
within one month, to avoid excessive consumption.
• On lower power shutdown, plug the charger, the machine tips " lower power" and "charging", the
device will enter to the menu if there is enough power.
• It's better to charge in standby, otherwise the changing time will be longer, as the screen consume
battery during charging.
multilaser
www. .com.br 19