Mounting Step 3: Connect The Product With The Adapter Cable, Toggle Switch, Power Supply Unit And Mains Lead; Mounting Step 4: Adjust The Lower Support - hafele 421.68.453 Manual De Instrucciones

4.6 Mounting step 3: Connect the product with the adapter cable, toggle switch,
power supply unit and mains lead
>
Mount the toggle switch (D) at the required location. Ensure that the cables do not enter the
product's range of movement
> Mount the power supply unit (G) with the supplied holding clamp (E)
> Connect the plug (F) to the power supply
3
4.7

Mounting step 4: Adjust the lower support

> Drive product (A) upwards
>
Remove cover cap
> Loosen the screw of the upper stopper
> Move stopper down to the required height
>
Tighten the stopper screw
4
2.5
1
2
A
C
3
7
E
G
D
4
6
5
F
23