Bissell SPOTBOT Guía De Usuario página 12

Manual Cleaning
6
When cleaning is complete, lightly drag
the suction nozzle across the stain
without pressing the trigger. This will
help dry the cleaned area.
8
Press the STOP button to turn OFF the
machine, then disconnect the cleaning
tool from the Flex Hose by pushing down
on the button lock and pulling straight
off (do not twist tools to remove them).
Tips While Cleaning
• Periodically clean out the black valve inside of the Dirty Water Tank.
12
www.BISSELL.com
7
Before turning OFF the SpotBot®, suction
up clean water to thoroughly rinse out
the inside of the Flex Hose. Then, lift the
vacuum hose up to drain any remaining
water into the Dirty Water Tank.
9
Unplug the machine and wrap the cord
around the Cord Wraps. Attach the Tough
Stain Brush to the base of machine. Wrap
the hose around the machine and secure
into the hose connector.