System Requirements; Connection Diagram; Device Installation; Device Operation - LEGRAND C2G 82389 Manual De Instrucciones

4X2 HDMI M
ATRIX
S R
YSTEM EQUIREMENTS
Source device(s) with an HDMI® output
•
• Receivers or Displays with an available HDMI input
One HDMI cable for each source device
•
• One HDMI cable for each output of the HDMI Matrix
Switch to the inputs on the receiver(s) or display(s)
C D
ONNECTION IAGRAM
S 4K30 Q
WITCH UICK
S G
TART UIDE
D I
EVICE NSTALLATION
Note: For optimal performance, use high-quality high-speed HDMI cables.
•
Step 1: Prior to installation, ensure that all devices are powered off.
•
• Step 2: Connect HDMI sources to the HDMI IN ports
Step 3: Connect HDMI displays to the HDMI OUT ports
•
Step 4: Connect the power adapter to the power input on the HDMI Matrix
•
Switch and then to an available AC outlet.
Step 5: Finally, turn on the source devices and the receivers or displays.
•
D O
EVICE PERATION
C HDMI M
ONTROLLING THE
• Step 1: Press the red POWER button to turn on the HDMI Matrix Switch.
Step 2: Select a connected receiver or display, by using the buttons on A
•
(HDMI 1) or B (HDMI 2). Select an input source device by pressing the
corresponding input button, numbered 1-4 on the remote control.
For example, if your Blu-ray DVD player is connected to Input HDMI 1
•
and your display is connected to Output HDMI 1 on the HDMI Matrix
Switch, then press #1 in the A box on the remote control to view/hear the
Blu-ray DVD's content.
Step 3: The two OFF buttons on the remote control can control the Out-
•
puts of A (HDMI 1) and B (HDMI 2) separately. Press the Red POWER
Controlling the HDMI Matrix Switch from the front panel
• Step 1: Press the POWER button to turn on the HDMI Matrix Switch.
• Step 2: Press and release the SELECTION button of OUTPUT 1 or OUT-
PUT 2 to scroll through the inputs.
Step 3: Press the POWER button again to turn off the HDMI Matrix
•
Switch.
3
S IR
ATRIX WITCH WITH THE
US
REMOTE CONTROL