Publicidad
Idiomas disponibles
Idiomas disponibles
E
The site survey results will display
all available access points and
wireless routers. Select the one
you want and click Yes.
F
If security is disabled, then
proceed to step G. If security is
enabled, the appropriate
Security Settings screen will
appear. Enter the WEP or WPA-
PSK settings. Then click Next.
WEP - Select the level of WEP
encryption, WEP (64-Bits) or
WEP (128-Bits). Then enter the
passphrase or the WEP key.
WPA-PSK - Enter the passphrase
or pre-shared key.
G
Now that the Setup Wizard has
found an access point or
wireless router with which to
communicate, it will now search
for the Range Expander. Select
the one you want and click Yes.
H
Enter the Range Expander's
default password, admin, and
click Enter. (Some wireless
networks may require additional
security settings, such as that
shown in Step F, at this time.)
I
Enter an IP Address and
appropriate Subnet Mask. Then
enter the IP Address of your
network gateway, as well as a
descriptive name for the Range
Expander. If you are not sure
what to enter, keep the default
settings. Click Next.
E
F
G
I
5
Publicidad
