Macally STANDWALLMOUNT Guia Del Usuario página 3

4. Remove pivotal screw caps and tighten as needed.
A
B
5. Insert tablet/smartphone into cradle
A
B
C
How to use as wall/cabinet
mount and
* Before adhering the 3M tape to the surface make
sure the drywall inserts are in place where applicable.
1. Remove the protective film from the 3M tape.
2. Place the mounting base on a flat surface (widest
opening upward/towards the user) and screw the base
into place.
*For a good adhesion, please wait 15-20 min before
placing the stand into the wall mount bracket.
3. Fold the legs inwards and place them into the
mounting base.
Important notes
• Please do not discard the Allen wrench. It may be
needed in the future to tighten/loosen the joints.
• Please use the included screws and drywall inserts
when possible. The weight of the unit may separate the
paint from the wall and cause it to fall to the ground.
2
A
B