Measuring Functions; Measuring Single Distance; Permament / Minimum-Maximum Measuring; Add / Subtract - geo-FENNEL GeoDist Manual De Instrucciones

EN

Measuring Functions

Measuring single distance

1 2

Permament / Minimum-Maximum measuring

1 2
2 sec
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values)

Add / Subtract

1 2
The next meas-
urement is add-
7.332 m
ed to the
previous one.
6
Aim active laser at target.
min. max.
The next meas-
urement is sub-
tracted from the
previous one.
Target surfaces: Measuring errors can occur
when measuring to colourless liquids, glass, sty-
3
rofoam or semi-permeable surfaces or when aim-
ing at hight gloss surfaces. Against dark surfaces
the measuring time increases.
8.532 m
The minimum and maximum dis-
tance measured is displayed
(min, max.). The last value meas-
ured is displayed in the main line.
8.532 m
This process can be repeated as required.
The result is shown in the main line and the
3
measured value above.
The same process can be used for adding or
subtracting areas or volumes.
7.332 m
12.847 m
geo-FENNEL GeoDist ®
3
Stops permanent / mini-
mum-maximum measuring.