ASU RI TY
T M
INSTALLATION (continued)
2
2.
CONNECT PUMP AND TANK AND INSTALL DRAIN TUBING
Attach 3/16" x 6" tubing to tank and to pump. Attach one end of 3/16"
x 6' tubing to pump and route the other end to building exterior or
other drain. Cut to length if necessary. Ensure that there is no siphon
(negative discharge) created by the outlet tubing.
3
3.
INSTALL VENT TUBING AND CONNECT DRAIN PAN TO TANK
Connect drain pan to tank using 9/16" x 8" tubing. Install 3/16" vent
tubing above drain pan. Ensure that vent tubing does not become
obstructed or blocked.
C O N D E N S AT E M A N A G E M E N T
A
E
D
B
F
B
2
3
6
PA G E