Installation Procedures - GOLUK T3 Guía Rápida

In the Package
After unpacking, please ensure the Goluk Fun Dashcam (the
"Camera") is intact. Check whether you have all the parts according
to the list below.
Camera×1 Docking station×1
Power cable×1 Wireless remote×1
Double-sided
User manual×1
adhesive tape×2
1
Vehicle
power adapter×1
Double-sided
adhesive tape×1
Card buckle×8

Installation Procedures

1. Insert a storage card. (We
recommend using a regular
Micro SD (TF) storage card
of Speed Class 10 or above)
Installation Area
3. Choose a proper location, such as the right side or the center of
the back of the rearview mirror. Remove the protective layer of the
3M adhesive tape on the docking station and the Camera, then stick
them onto the windshield. Turn the Camera until it faces the front.
Attention: Do NOT install on the safety airbag cover or
within function area of the airbag. We do not undertake
any responsibilities for injuries or deaths caused by
vehicle collisions or issues concerning safety airbags.
3M double-sided adhesive tape of docking station
should be used on a clean, stainless glass surface. Rest
for over 24 hours to ensure strongest adhesion. It is not
suggested to insert the Camera during that period.
LOCK Button
facing inwards
of the car.
2. Insert the Camera into the
docking station. Press and hold
LOCK to take it out.
2