Universal Forest Products BELKNAP HILL Instrucciones De Armado

Contents
• 2 Leg supports
• 2 Center supports
• 1 Table top
The knock-down table uses grooves in the table
supports and in the table top for quick assembly and
disassembly. When assembling, make sure the pieces
have been firmly inserted into the appropriate grooves.
Step 1
Firmly insert the groove of the center support into the
groove of one of the leg supports. Repeat this step for
the other leg support.
Step 2
Lay the table top on the supports so that the table top
grooves fit securely on the tabs of the leg supports.
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR USE OF THE
PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE CONSTRUCTION OR USE OF THIS
PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING
THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR
IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
KNOCK-DOWN TABLE
ASSEMBLY INSTRUCTIONS
©2014 Universal Forest Products, Inc. All rights reserved.
UFP Riverside, LLC
2100 Avalon St. | Riverside, CA, 92509 | 951.826.3000
7049 9/14
www.BelknapHill.com
KDWorkTable1.ai
KDWorkTable2.ai
Step 1
Step 2