Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
3
Step 2:
Insert the rear seat (#1) into the front seat (#3). Make
sure that the spring clips on the rear seat (#1) come
through the holes on the front seat (#3). See Figure 2.
FIGURE 4
14
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly,and dry frame completely. Do not use
bleach, acid, or othersolvents on the frame or fabric parts.
• The cushions may be washed on the surface by only using mild soap and water or commercial foaming
upholstery cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts or fasteners on a regular basis to ensure the proper performance and safety of your
lounge.
• In order to prolong the life and beauty of your lounge, we recommend that it be stored in a dry and protected
areaduring the off season periods.
Warranty
• This product is covered by Courtyard Creations Inc.'s one–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
The store where you made your purchase
V-3
1
13
STOP!
Missing A Part?
No Need To Go Back To
The Store
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
2
Step 3:
Fasten the back assembly (#4) to the rear seat (#1) by
using bolts (#6), washers (#8), and plastic nuts (#9).
Make sure that all of the bolts have been tightened
completely. See Figure 3.
Step 4:
Place cushions (#13 and #14) onto the lounge. Secure
the cushions to the lounge by using the
See Figure 4.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 2 OF 2
6
8
9
4
1
2
#6 BOLT M6*40
40
velcro
straps.
Publicidad
