Intex Comfort-Rest Prestige Airbed 15PO Guia De Inicio Rapido

ENGLISH
Comfort-Rest
READ AND FOLLOW ALL INSTRUCTIONS BEFORE INFLATING OR USE
BEFORE INFLATING WITH BUILT-IN PUMP
• S pread the airbed out on a flat surface. Make sure this surface is free of
stones or others sharp objects which might puncture the airbed.
• The built-in air pump inflation valve must face up.
• Make sure that the insert plug is properly positioned and the 2 in 1
exhaust valve cap is securely tightened.
2
TO INFLATE USING THE BUILT-IN PUMP
• Remove the air pump inflation valve cap and insert plug . Save the cap
and plug to reattach after inflation.
• Locate and spread the built-in foot pump out to ensure the foot pump
surface is flat and straight.
• Placing your foot directly over the inflation valve opening, push firmly
down . This will push air from the air pump chamber into the bed.
3
• Release your foot so the air pump chamber will re-fill with air for the
4
next cycle.
• Repeat until desired firmness is achieved.
• Replace the air pump inflation valve insert plug and cap .
TO INFLATE USING AN EXTERNAL AIR PUMP
• M ake sure the air pump inflation valve insert plug is properly positioned
and the 2 in 1 exhaust valve cap is securely tightened.
2
• Pull 2 in 1 valve cap to open.
2
• Insert the nozzle from an air pump into the 2 in 1 inflation valve.
• Inflate the product to approximately 80% of desired firmness.
CAUTION: To prevent bursting, do not over inflate or use
high pressure air compressor.
• Close 2 in 1 valve cap securely after inflation.
2
TO DEFLATE
• Pull out 2 in 1 valve cap.
2
• Pull inflation valve base to release air.
CAUTION: When opening, point the exhaust valve away from any person.
• Replace inflation valve base and cap securely.
• Infants have suffocated on inflatable mattresses. Never place infant aged birth to 15
months to sleep on this inflatable air mattress / air bed. Infants can suffocate on an
underinflated or deflated mattress, on bedding , by co-sleeping with another person, and
by entrapment between the mattress and bed frame or between the mattress and a vertical
surface.
• Children can be entrapped between the inflatable mattress and an adjacent vertical
surface. Provide at least a shoulder width space between the inflatable mattress/airbed
and adjacent vertical surfaces such as walls, dressers or other objects.
• Always keep the inflatable mattress fully inflated when in use.
Air inside of bed may expand and contract with varying temperature leading
to reduce pressure inside of the bed. If this occurs, simply add more air using
the pump to achieve desired firmness. If puncture occurs, please refer to
instruction. Repair kit/patch is enclosed.
–––– SAVE THESE INSTRUCTIONS ––––
©2014 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas utilizadas en algunos países
del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd.,
G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l'Union Européenne par/
Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
Consumer Service 1-800-234-6839
www.intexcorp.com
(15PO) PRESTIGE AIRBED WITH BUILT-IN FOOT PUMP SIZE: 7.5" X 10.3" 04/18/2014
Prestige Airbed
™
™
WITH BUILT-IN PUMP
1
1
WARNING
IMPORTANT
1
1
2
15PO
1
2
3
4
2
INFLATE
DEFLATE
015-*PO-R0-1504