Descargar Imprimir esta página
Reelcraft 4400 OLP118 Instrucciones De Operación

Reelcraft 4400 OLP118 Instrucciones De Operación

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Operating Instructions
Series 4000 Spring Driven Hose Reels
Low Pressure Model Numbers:
4400 OLP118
4425 OLP118
4600 OLP118
4625 OLP118
Dimensions
ORIGINAL INSTRUCTIONS
Noise is less than 70 dB(A)
INSTALLATION:
A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible
misalignment and binding.
MOUNTING:
The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or
ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing
the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the
reel at the desired position and replace the screws. NOTE: For proper installation in wall mount applications, ensure
reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause latching issues.
LUBRICATION:
Hose reel spring and bearings are factory lubricated and require no further lubrication.
REPLACING HOSE: 1. Wind spool flange clockwise-facing swivel-until spring is tight.
2. Back off three turns and latch.
3. Insert hose through roller guide.
4. Connect hose fitting to swivel joint and secure hose with clamps.
ADJUSTMENTS:
To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is
obtained.
REPAIRS:
Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may
void your warranty. Remove all spring tension before beginning disassembly process.
Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777
Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG
europe@reelcraft.com • www.reelcraft.com/europe
4435 OLP118
A
327 mm
B
314 mm
C
203 mm
D
64 mm
E
143 mm
1. Do not use reel at higher pressures or temperatures than listed on
the back of this bulletin.
2. Remove all spring tension before beginning dissassembly process.
SAFETY
Form# R828-696 Rev: 11/2019

Publicidad

loading

Resumen de contenidos para Reelcraft 4400 OLP118

  • Página 1 Remove all spring tension before beginning disassembly process. Form# R828-696 Rev: 11/2019 Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777 Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG...
  • Página 2 S260648 Spring Arbor S32-136 10-24 x 3/8” Mach. Screw 300002 10-32 x 1/2” Screw S400012 Latch Bushing Item # Description # Req. 4400 OLP118 4425 OLP118 4435 OLP118 4600 OLP118 4625 OLP118 Bumper Stop Assembly None 1-HR1004A 1-HR1004A None 1-HR1004...
  • Página 3: Instrucciones Originales

    Remueva todos los resortes de tension antes del proceso de desmontaje. Page 3 Form# R828-696 Rev: 11/2019 Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777 Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG europe@reelcraft.com • www.reelcraft.com/europe...
  • Página 4 S260648 Resorte de tambor 21 S32-136 10-24 x 3/8" Tornillo 300002 10-32 x 1/2" Tornillo 22 S400012 1 Seguro del casquillo Arti Descripcion 4400 OLP118 4425 OLP118 4435 OLP118 4600 OLP118 4625 OLP118 culo Req. 10 Parachoques Ensamblados Ninguno 1-HR1004A...
  • Página 5: Instructions D'opération

    Enlevez toute tension de ressort avant de désassembler. Page 5 Form# R828-696 Rev: 11/2019 Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777 Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG europe@reelcraft.com • www.reelcraft.com/europe...
  • Página 6 S32-136 10 -24 x 3/8" vis à métaux 300002 10 -32 x 1/2" vis S400012 manchon de loquet N° N° Déscription 4400 OLP118 4425 OLP118 4435 OLP118 4600 OLP118 4625 OLP118 d’article requis. Butoir Assemblée Aucun 1-HR1004A...

Este manual también es adecuado para:

4425 olp1184435 olp1184600 olp1184625 olp118